Pickguard filing.
I've had to skew the bridge 3 degrees as both E's were maxed out both ways.
This required a dowelling, re-drill.
Glad it didn't mar the finish.
Which, after weeks and weeks of contemplation, is going to be a dark green after all.
cheers, Mark.
Oh thank goodness, I thought it was going to beige with a beige scratch plate.
Hi D.M. Up until now some folks probably thought it was beige with a beige scratch plate.Originally Posted by DarkMark
cheers, Mark.
Haha, I didn’t want to comment on it and cause offence. Beige on beige is so uncool it would take someone supercool to build it. I thought you might just be cool enough to be the one. Dark green sounds good to me.
New Zealand used to rock the beige n brown.....
Oh look he’s bowling underarm
Build 1: Non-PBG Flamed Maple LP - Wine Red
Build 2: JRM-1DC - The Butterscotch Belle
Pedalboard Build
"The bowler's Holding, the batsman's Willey".
(Brian Johnson, BBC commentator, at a 1976 England Vs West Indies match).
Last edited by Simon Barden; 18-12-2018 at 10:19 PM.
Just caught up with this build KC. Nice work and mods mate. great job so far.
How did you do the bevel on the pick guard material?
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
I reckon Cricket was invented with 'double entendre' in mind.
B.J. produced a few
'There’s Neil Harvey standing at leg slip with his legs wide apart, waiting for a tickle'.
'Ray Illingworth has just relieved himself at the pavilion end'.
'As he comes into bowl, Freddie Titmus has got two short legs, one of them square'.
Hi Andy4O thanks for the comment.
Bevel was done thus, but with patience patience patience.
Will probably finesse it again in a few spots as the glaring errors attract my attention.
cheers, Mark
Old School. respect
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Finally some movement at the station.
Wired it up and getting ready for re-fitting the neck.
Into the final straight.
cheers, Mark.
Posting Permissions
Reply With Quote