Funnily enough, my genuine 2013 Gibson USA Les Paul Studio has at least one issue which I think is due to less than good quality control, the high e-string seems to be closer to the edge of the fretboard than the low e-string, note this is an instrument that I paid Au$2000.00 for.
I tried to aim the camera as close to 90 degrees to the centreline of the neck as I possibly could, it's possible that either the neck was glued-on slightly crooked, or it is being pulled sideways by the string-tension, or the bridge mounting-stud holes are a bit off-centre.
Last edited by DrNomis_44; 26-10-2018 at 03:49 PM.
Reply With Quote