Hi Matt. Dingobass used to lightly wet sand with 600 grit to smooth it out. I use 1500grit if needs be.
Hi Matt. Dingobass used to lightly wet sand with 600 grit to smooth it out. I use 1500grit if needs be.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Hi Matt, sorry i only just caught up with this. I see Andy40 has already posted what I would have recommended, a very light wetsand with 600 or 800. Just a couple of passes with the paper on a hard cork block or similar.
that should either clear the bumps, or tell you if you've got a bigger problem to deal with.
Go in one direction only, and rinse and clear your paper every couple of strokes. If it goes away then all good, you can move up to 1200-1500 paper to get it really smooth. Hope that helps
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
thanks for the reply guys will give it a shot!