Neck fit is amazing Sonic, I cleaned that up the other day and its sitting flush.



Unfortunately I have bad new for myself, without measuring the holes are definitely drilled wrong. The bridge won't fit on the pegs when they are hammered in the entire way! If you take them out and put them on a big angle you can force it on, but it isn't practical.





I am 100% going to have to dowel and drill now, something I really didn't want to do. To add to injury the nut is chipped very badly and is going to require replacing, and this project is quickly becoming 1. very costly replacing parts and 2. getting out of my skill level.

Really starting to wonder if its going to be cheaper/easier/better end product to buy a second hand epiphone dot and repaint/replace with what I'm after.