If they are that loose then you will likely need to use superglue to get them to stay put. It's not something I've had to do (yet) but it is fairly common. I'd imagine clean up would be a bit of a beeeatch after though.
If they are that loose then you will likely need to use superglue to get them to stay put. It's not something I've had to do (yet) but it is fairly common. I'd imagine clean up would be a bit of a beeeatch after though.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
So had a go at using dingo wax on the fretboard then super glue on the fret seems tohave held the fret and allowed me to scrape the super glue of easily
You always have an interesting style of dyeing guitars Barnsey. Its very unique
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Ahhh the wait.......actually postage has been pretty fast lately.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
👍 This is a truly unique build.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
So I'm having dramas with the wiring. I had it all working outside of the guitar then when i tried to fit it the thread on the pot and jack plug weren't long enough. Sorted that out and redid the wiring and now ive got no sound, the current tester is reading 15 plus from all active points to an earth point so I'm a bit stumped as to whats wrong the pic has te active on the jack tip and earth to one of the pickup slugs
Last edited by Adam Barnes; 09-01-2019 at 11:00 AM.