Results 1 to 8 of 8

Thread: OTL Headphone Amp project.

  1. #1
    Overlord of Music DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    4,746

    OTL Headphone Amp project.

    Hey everyone,


    I've got a new build project to add to my list of build projects to tackle, this time I want to have a go at building an electronic device called an OTL Headphone Amplifier, so, exactly what is an OTL Headphone Amplifier?

    Firstly, OTL is short for Output Transformerless, now most amplifiers that use tubes or valves to amplify, or make bigger, an audio signal, will need to use an electronic component known as an Output Transformer, it does at least a couple of essential jobs in a tube or valve amplifier, firstly, it isolates the loudspeaker from the high +HT supply voltages that the amplifier needs in order to operate correctly, secondly, it "Transforms" the impedance of the loudspeaker up to a level that the power tubes are happy with, most power tubes used in guitar amps nowadays don't really like working into low-impedance loudspeakers.

    One other thing is that an Output Transformer enables a type of amplifier operating called "Push-Pull", in this case at least two power tubes are used to increase the output-power capability of the amplifier, you've most likely seen some Marshall or Fender amps with two, four, and maybe more, my mid 70's Fender Super Twin amplifier uses six 6L6 power tubes, in Push-Pull operation, one power tube "Pushes" while the other one "Pulls".

    So, why build an Output Transformerless Headphone amp when most tube amps need an Output Transformer to operate?, well, the OTL Headphone amp I want to build is usually part of a home HiFi system, it is even considered high-end audio equipment, usually when it comes to building a tube amp for guitar amplification purposes, we are not really concerned with achieving HiFi performance since a tube guitar amp is used with an electric guitar as part of the tonal-shaping system, where the guitar and the amp work in synergy to create the final resulting sound, ever noticed how plugging a guitar into say a Vox AC30 amp can produce a sound that's different to what you would get if you plugged the same guitar into say a Fender Twin, or a Marshall JTM45, the amp that the guitar is plugged into is playing a part in creating the resulting tone.

    Now when it comes to HiFi equipment, we are more concerned with making a reproduced signal, louder or bigger, but still sounding like the signal we started off with, we don't want to make it sound distorted and fuzzy, we want to reproduce the signal as faithfully as possible, that's the whole idea behind HiFi, or "High Fidelity".

    As it turns out, the Output Transformer has a tendency to produce it's own form of distortion, so if we can somehow eliminate the Output Transformer, we can eliminate one source of distortion, of course, I could build the Headphone Amp using modern Solid-State technology if I wanted to, and there are a few designs on the internet, but seeing as I'm a bit of an old-school electronics kind of a guy, I thought that an Output Transformerless Headphone Amp would be a cool project to tackle, it would be fun as well.


    Stay tuned for more updates, by the way, comments are most welcome......

  2. #2
    Overlord of Music Dedman's Avatar
    Join Date
    Mar 2016
    Location
    The "Fabulous" Gold Coast
    Posts
    3,506
    *still waiting on my sharks with frikken "lazer" beams........
    Build 17 WL-1 Kustom
    Build 16 TL-1TB Kustom
    Build 15 PBG-2- Finished
    Build 14 FTD-1Finished
    Build 13 RD-1 Kustom
    Build 12 DM-1S Finished
    Build 11 MKA-2 - finished
    Build 10 Basic strat finished
    Build 9 JM Kustom finished
    Build 8 FV-1G finished
    Build 7 ES-2V finished
    Build 6- Community prototype 4 finished ( 3 times!)
    Build 5 LP-1LQ finished
    Build 4 ES-5V finished
    Build 3 JR-1 finished
    Build 2 GD-1 finished
    Build 1 TLA-1 finished

  3. #3
    Overlord of Music DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    4,746
    Quote Originally Posted by Dedman View Post
    *still waiting on my sharks with frikken "lazer" beams........

    Hahahahaha.....thanks for reminding me about that one mate....cheers.

  4. #4
    Overlord of Music Fretworn's Avatar
    Join Date
    May 2013
    Location
    Hornsby Area, Sydney, NSW
    Posts
    3,610
    We’ve got mutant sea bass............
    Current:
    AST-1FB

    Completed:
    First Act ME276 (resurrected curb-side find)
    ES-5V
    Scratchie lapsteel
    Custom ST-1 12 String (to be converted to 6 string)
    JBA-4
    TL-1TB
    Scratch Lapsteel
    Meinl DIY Cajon
    Cigar Box lap steel

    Wishing:
    Baritone
    Scratchie 12 string
    Open D/Standard Double 6 twin neck

  5. #5
    Overlord of Music DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    4,746
    Quote Originally Posted by Fretworn View Post
    We’ve got mutant sea bass............

    Hahahaha....but they aren't just ordinary mutant sea bass....they are ill-tempered mutant sea bass....heeheeheehee....

  6. #6
    One of my makerspace students is building one of these

    http://www.parasitstudio.se/stripboa...p-punch-amp-v2

  7. #7
    Mentor Marcel's Avatar
    Join Date
    Apr 2017
    Location
    Bouldercombe Qld.
    Posts
    1,015
    Bon Voyage my friend on your transformer-less tube journey.... It is a fairly obscure path but at least it is a path that a few others have ventured before...

    In the back blocks of my memory I do remember seeing only the one time in a Melbourne meeting of interested individuals a stereo DC coupled transformer-less tube hifi amp. It was in the early '70's as I entered my teenage years, and it was an event that had all who witnessed it in an absolute tizzy... although at the time I didn't see/hear what the fuss was about and frankly I was just a little disappointed as I considered the audio source and loudspeakers were not truly up to the task ...

    Since that day I have heard fully DC coupled systems and have been incredibly impressed, and by all reports that I've encountered on transformer-less tube amps they are equally incredibly impressive devices to hear...

    Good luck... keep us informed... and postcard to us plenty of pictures...
    Builds-
    #16 PBG IB-1Q http://www.buildyourownguitar.com.au...ead.php?t=8754
    #15 PBG TLA-12 http://www.buildyourownguitar.com.au...ead.php?t=8444
    #14 PBG PRS-1H http://www.buildyourownguitar.com.au...ead.php?t=8021
    #13 PBG SGM-1 http://www.buildyourownguitar.com.au...ead.php?t=7771
    #12 PBG JK-2
    #11 Scratch build AC15 clone head
    #10 PBG RCM-4F
    #09 PBG ES-1TL
    #07 partscaster Alder Denim Tele.

  8. #8
    Overlord of Music DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    4,746
    Was thinking of basing my OTL Headphone amp on this design:

    http://astersart.net/amp/headphones/..._amplifier.htm


    There may be some issues with regards to the output current capability not being enough to drive my pair of Audio Technica ATH-M30X Headphones, cause it's quoted impedance is 42 Ohms.
    Last edited by DrNomis_44; 12-07-2018 at 11:13 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •