A back burner project is in the "analysis paralysis" phase.
Still waiting on some bibs and bobs.
What nonsense am I up to?
I guess time will tell....
A back burner project is in the "analysis paralysis" phase.
Still waiting on some bibs and bobs.
What nonsense am I up to?
I guess time will tell....
Col.
I admit that I am an agent of Satan, however, my duties are largely ceremonial.
\m/
Still going for world domination I'm guessing....
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
SSSSSH Deddy, don't give it all away...
I wonder if this helps?
Col.
I admit that I am an agent of Satan, however, my duties are largely ceremonial.
\m/
DIY Footswitch?
Give the man a Kewpie Doll!
Now for the big question, what will it (hopefully) do?
Col.
I admit that I am an agent of Satan, however, my duties are largely ceremonial.
\m/
ABY?
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Well I got off my corpulent backside and ducked down to Jaycar to get the bits I needed.
It is a footswitch array with a micro-controller to send commands to RiffStation to control the transport commands while my hands are occupied with a guitar.
The pedal is built.
The micro-controller assembly is in its housing.
Just fussing with the coding. To be honest it isn't that difficult but like most of us my memory ain't what it should be so relearning C++ is a bit of a strain.
Although it has reminded me of the reasons I got out of software...
Once that is done I need to pretty it up a bit.
Last edited by Rabbitz; 23-06-2018 at 07:34 PM.
Col.
I admit that I am an agent of Satan, however, my duties are largely ceremonial.
\m/
you lost me after "It is a footswitch array...."
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
How's about its a foot switch with four buttons to control RiffStation?
Col.
I admit that I am an agent of Satan, however, my duties are largely ceremonial.
\m/
Riffstation Controller v1.0 is together.
Well it was easier than I thought.
For those who are interested it is based on a Pro Micro micro-controller (ATMega 32U4) which sends key stroke info via the USB port to Riffstation.
I have four control switches Step Back (<<), Return to Start (|<<), Pause/Play (||/>), Step Forward (>>).
Compiled in the Arduino IDE.
If anyone wants the code, just ask and I'll post it, well I'll tidy it up, add comments and post it
Col.
I admit that I am an agent of Satan, however, my duties are largely ceremonial.
\m/
Posting Permissions
Reply With Quote
