Hooooo Boy! thats is looking Schmick as all Funk. Nice work there HCT!
Hooooo Boy! thats is looking Schmick as all Funk. Nice work there HCT!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Neck is glued, finally looks like a guitar. Now for the fun of wiring...
Looking great man
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
It is now safe from slugs. Put some strings on tonight and this baby is done!
Awesome work, looks fantastic
Tony
Your adopted baby is finally seeing the finish line 😁Originally Posted by vh2580
To add to the 'stupid things I have done on this build' list. I worked out why I was getting no sound during initial testing stages, I managed to put a pickup ring screw straight through the bridge pickup wire severing 2 wires. Grrrrr! Back to the soldering iron.....
Not quite sure how you managed that, but 'ouch'!
Well the pickup ring screw hole goes directly over the passage to the pot cavity on the rear. Much swearing was involved, but at least I found the issue. All re joined and reinstalled now. Time for finishing touches and testing
Just checked on my EX-1 and I could very well have experienced the same thing. Short screw only for that corner! Thanks for the warning.
Posting Permissions
Reply With Quote