Hello Eveyone
Well the box arrived safe and sound, thanks Oz post! It feels abit like Christmas without the turkey or annoying relatives.
First job, dry build to check everything is there’s and have a look for any issues.
Hello Eveyone
Well the box arrived safe and sound, thanks Oz post! It feels abit like Christmas without the turkey or annoying relatives.
First job, dry build to check everything is there’s and have a look for any issues.
Last edited by Dolphinboy; 30-07-2018 at 11:28 PM.
Love the thick sound of a thunderbird. Exhibit A: midnight oil: underwater.
If I ever get to do another build it’ll be this. All the best. Hope you get a thunderous thump out of that bad boy/girl
Hello Again
Well the dry build build went okay......ish. Discovered a couple of issues, first one is that the drilled holes in the body don’t align with the holes in the neck mounting plate which is weird as they are the only holes drilled into it and secondly, there is a router mark in the heal of the neck where it fits into the body that you will be able to see when it’s all mounted up. Wondering if anyone has had similar problems or if I am just incredibly lucky.
Any ideas to fix them?
Other than that, the kit is good, well put together and nicely finished with quality joints.
Next job, sand sand and sand!
Hi Dolphinboy, if you can post some photos as that always helps us understand what you are dealing with.
Cheers, Waz
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Suggest sending an email to Adam as that neck heel issue will remain visible.
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Hi
Thanks for the advice Wazkelly. I had wondered about filling and sanding back to match the profile but sort of concerned that the join would be obvious particularly on the top face and as it is going to be stained, would stick out.
I will flick him a msg.
In the mean time, sanding goes well, the dust makes the dog sneeze though!!
cheers
I tried to get him to sand but he’s to lazy! A mask sound like a plan though.