Hmmm ... I think I'm overthinking this ....
I'll just go with the stock setup for now.
Hmmm ... I think I'm overthinking this ....
I'll just go with the stock setup for now.
Good idea to see how it sounds before commiting to expensive upgrades.
Cheers, Waz
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Fender electric Fat Strat mim. (Bought)
Maton Electric Acoustic EM325C
Pitbull Guitars ST-1 ( finished) http://www.buildyourownguitar.com.au...ead.php?t=5970
Pitbull Guitars SG-2 ( Finished) http://www.buildyourownguitar.com.au...ead.php?t=6124
Pitbull Guitars JM-1 (Finished. 2018 June GOTM))http://www.buildyourownguitar.com.au...ead.php?t=7150
Pitbull Guitars TL-1 (In production) [url]https://www.buildyourownguitar.com.au/forum/showthread.php?t=8676
Yes very true but i will quote here as my explanation was not very good.
Potting is the process of soaking the pickup in melted wax, in order to saturate the components, which will isolate them and reduce movement of the coils. Because of this, potted pickups have reduced likelihood of excessive handling noise, microphonic feedback or mechanical failure. However, if a pickup is potted too much, the pickup can often sound lifeless and dull, lacking character and “vibe”.
Hope this helps.
Fender electric Fat Strat mim. (Bought)
Maton Electric Acoustic EM325C
Pitbull Guitars ST-1 ( finished) http://www.buildyourownguitar.com.au...ead.php?t=5970
Pitbull Guitars SG-2 ( Finished) http://www.buildyourownguitar.com.au...ead.php?t=6124
Pitbull Guitars JM-1 (Finished. 2018 June GOTM))http://www.buildyourownguitar.com.au...ead.php?t=7150
Pitbull Guitars TL-1 (In production) [url]https://www.buildyourownguitar.com.au/forum/showthread.php?t=8676
new tortoise shell scratch plate and truss rod cover for the RC-1 !
Also discovered that , (if I don't tell the missus, while she's away... ) I can use the bathroom with overhead heating and extractor fans, as a paint drying/curing room. !!!
Out of the wind and rain, stable temperature, dry, fumes extracted and heaps of good lighting !
Last edited by wcieslik; 15-06-2018 at 11:55 AM.
Not really,a mic uses a moving diaphragm to move a coil of wire near a magnet, producing electromagnetic induction of a small current,
Guitar pickups use the vibration of the string to disturb the magnetic field around the coil wrapped around the magnet. This changing of the field induces a tiny current in the wire. There's no moving diaphragm involved.
I'm guessing wax potting holds the coil of wire around the magnet still as if this vibrated it would induce a current in itself as it would move through the magnetic field as it vibrated. This current would not be induced by the vibrating string and would be non-musical. Noise of some frequency (much like a lot of my playing).