Getting close now. The white pick guard arrived and is excellent so I did the wiring on a cardboard template. I really couldn’t understand the supplied wire so bought a length of UK household stuff and followed what I’m used to, green/yellow earth, brown live (hot) and the blue here and there! I’ll get strapped together when I’m ready to mount the plate.
I really enjoyed doing the electrics for uthe first time and what a wonderful sense of relief it is when it’s plugged in and the tap test works. It also gives the opportunity of knowing which was the selector should face on the inside.
I asked the scratch plate maker to not drill out the pickup screw holes, a good decision as it gave me some wiggle room to get them parallel. Am I allowed to advertise the company?
I’m missing some washers, plain and locking. Also there’s a bit of tear out by the factory (probably OK for the supplied tuners but not the ones I’m using) on the front of the holes so I need to source a washer to hide it under the bezels.
So once I’ve got these bits and bobs it’s final assembly time.
Sent from my iPhone using Tapatalk