EX -4 ZZ TOP homage

[Hardcoretroubadour]

Just dug out some black spare bits that I won't need and yours if you want them.....supposed to be a Graphite 4 string Bass Nut but from underneath it still looks like black plastic, couple of plastic black control knobs, black square LP style jack plate, and I ordered a one ply bell shaped truss rod cover and 5 arrived in the mail from a Chinese eBay store??? You can have a couple of them too if you like.
Attachment 26877
Cheers, Waz

Cheers Waz that would be great, I'll PM you my address

[Hardcoretroubadour]

Care package arrived safe and well Waz, cheers mate, much appreciated 😀

[wazkelly]

Good to hear Brendan.

How does the jack plate fit and does it look ok?

Sent from my SM-A520F using Tapatalk

[Hardcoretroubadour]

I'll have a play tomorrow, knee deep in plumbing at the moment

[wazkelly]

Hopefully not a job involving human waste.

Sent from my SM-A520F using Tapatalk

[Hardcoretroubadour]

No luckily, reseating taps and trying to remove corroded on parts. After much swearing I got there in the end

[wazkelly]

Thank god us was the incoming fresh plumbing that needed your assistance.

Sent from my SM-A520F using Tapatalk

[Hardcoretroubadour]

Alright, the very long staining process is coming to an end and I am getting ready to install the hardwear and the neck. Being a complete novice to this I was trying without much luck to find some tutorials on the installation of the bridge for the EX -4 bass. Anyone done one or can point me to a thread that shows it?

[wazkelly]

Alright, the very long staining process is coming to an end and I am getting ready to install the hardwear and the neck. Being a complete novice to this I was trying without much luck to find some tutorials on the installation of the bridge for the EX -4 bass. Anyone done one or can point me to a thread that shows it?

Being pre drilled not much can be done at that end and scale length adjustment will therefore need to be done through where the neck bolts are positioned and secured.

Sent from my SM-A520F using Tapatalk

[wazkelly]

Being pre drilled not much can be done at that end and scale length adjustment will therefore need to be done through where the neck bolts are positioned and secured.

Sent from my SM-A520F using Tapatalk

Just remembered there are a few Thunderbird builds done earlier this year, Ozbike in particular, and well worth a look as they come with same bridge.

Sent from my SM-A520F using Tapatalk