Hi all. Here is my build so far. From receiving the guitar, i have test fitted, sanded, sealed and stained the guitar. I even went as far as masking up the frets to seal and satin clear the neck. not sure if others here have don the same. One thing I'll take from this so far is to dust on the stain with the spray gun, because the stain bleed through the fine line tape. Guess I'll be spending a little time tomorrow fixing it. Lesson learned! Hopefully I'll get to clear it tomorrow as well. If there is anything I could have done different for future builds, your comments would be appreciated. PS not too sure with what I'm doing with uploading photos, so if the images don't appear I'll try again.