Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 58

Thread: JagMustAster - 1 (or2?)

  1. #1

    JagMustAster - 1 (or2?)

    If you'll excuse the silly thread title, I've had this since Feb and thought it might be time to start a diary for it.

    Had a problem straight out of the gate, the bridge post holes wouldn't let the bridge sit square to the centre line of the body. Let Adam know and he offered to replace the body immediately, excellent service as always. Channeled my inner Baldrick and came up with another option (cunning plan possibly). If I used a Mustang trem it would not only replace the stock bridge but also cover up the filling of the stock trem cavity (on the front at least). At the same time decided to use a Jag bridge so the saddles could be set to the same radius as the fretboard, the Mustang ones are set for 7.5" radius from memory.
    Click image for larger version. 

Name:	JM 01.jpg 
Views:	65 
Size:	352.0 KB 
ID:	23543Click image for larger version. 

Name:	JM 02.jpg 
Views:	74 
Size:	400.6 KB 
ID:	23544Click image for larger version. 

Name:	JM 05.jpg 
Views:	71 
Size:	320.3 KB 
ID:	23545

    cont...

  2. #2
    Then had to fill the rear cavity, much in the same way as nitro described in his tutorial, I had a few gaps around the edges.
    Click image for larger version. 

Name:	JM 07.jpg 
Views:	69 
Size:	342.0 KB 
ID:	23546Click image for larger version. 

Name:	JM 08.jpg 
Views:	65 
Size:	388.6 KB 
ID:	23547Click image for larger version. 

Name:	JM 09.jpg 
Views:	69 
Size:	370.6 KB 
ID:	23548
    The underside of the 'stang trem, and in pieces
    Click image for larger version. 

Name:	JM 10.jpg 
Views:	63 
Size:	292.9 KB 
ID:	23549Click image for larger version. 

Name:	JM 11.jpg 
Views:	62 
Size:	398.3 KB 
ID:	23550

    cont..

  3. #3
    Used a forstener bit in the drill press to make the spring cavities and straightened up the sides with a chisel, not the neatest work but wont be seen.
    Click image for larger version. 

Name:	JM 13.jpg 
Views:	64 
Size:	298.6 KB 
ID:	23551Click image for larger version. 

Name:	JM 14.jpg 
Views:	68 
Size:	344.5 KB 
ID:	23552Click image for larger version. 

Name:	JM 15.jpg 
Views:	64 
Size:	290.1 KB 
ID:	23553

    cont.

  4. #4
    And after months of trying to work out which pups to use, went down a different (pricey) path and bought a set of Klein '58 DuoSonic replicas -that's the (or 2?) part of the thread title. Also picked up a set of switch plates for the full Jag switching options.
    Click image for larger version. 

Name:	JM 16.jpg 
Views:	63 
Size:	312.6 KB 
ID:	23554Click image for larger version. 

Name:	JM 17.jpg 
Views:	72 
Size:	373.0 KB 
ID:	23555
    So you can see where the plates are in relation to the routs. No holes drilled yet, they may be moved depending on what shape I come up with for the scratch plate.
    Click image for larger version. 

Name:	JM 18.jpg 
Views:	61 
Size:	438.6 KB 
ID:	23556
    Chromed pup covers seem to look better to me.
    Click image for larger version. 

Name:	JM 19.jpg 
Views:	63 
Size:	366.3 KB 
ID:	23557
    Just an idea of where this might be heading.
    Click image for larger version. 

Name:	JM 20.jpg 
Views:	65 
Size:	343.1 KB 
ID:	23558

    Grant

  5. #5
    Overlord of Music Sonic Mountain's Avatar
    Join Date
    Jul 2017
    Location
    Toowoomba, Qld.
    Posts
    2,888
    This is rad, great custom work.

    What kind of finish are you thinking?
    Build 1 - Shoegazer MK1 JMA-1
    Build 2 - The Relliecaster TL-1
    Build 3 - The Black Cherry SG AG-1
    Build 4 - The Sonicaster TL-1ish
    Build 5 - The Steampunker Bass YB-4
    Build 6 - The Howling Gowing ST-1

    "What I lack in talent I make up for with enthusiasm"

  6. #6
    Thanks Sonic.

    Plan A is to go for a dark green stain to go with the cream pearloid. How that turns out is entirely dependant on how the repair to the back covers up. If that fails, Plan B is paint.

    Grant

  7. #7
    GAStronomist FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    5,089
    The FrankenLab Salutes you Sir! Great custom options, I look forward to seeing how this pans out.
    FrankenLab Guitar Experiments
    Making the simple complicated since 2016!

  8. #8
    Overlord of Music Sonic Mountain's Avatar
    Join Date
    Jul 2017
    Location
    Toowoomba, Qld.
    Posts
    2,888
    Quote Originally Posted by neverwas View Post
    Thanks Sonic.

    Plan A is to go for a dark green stain to go with the cream pearloid. How that turns out is entirely dependant on how the repair to the back covers up. If that fails, Plan B is paint.

    Grant
    Green is nice! Sounds great.
    Build 1 - Shoegazer MK1 JMA-1
    Build 2 - The Relliecaster TL-1
    Build 3 - The Black Cherry SG AG-1
    Build 4 - The Sonicaster TL-1ish
    Build 5 - The Steampunker Bass YB-4
    Build 6 - The Howling Gowing ST-1

    "What I lack in talent I make up for with enthusiasm"

  9. #9
    Overlord of Music Dedman's Avatar
    Join Date
    Mar 2016
    Location
    The "Fabulous" Gold Coast
    Posts
    3,538
    Thou shall Kustomize!
    Love where this is going.
    Build 19 PSH-1 Kustom
    Build 18 HB-4S Kustom
    Build 17 WL-1 Kustom
    Build 16 TL-1TB Kustom
    Build 15 PBG-2-
    Build 14 FTD-1
    Build 13 RD-1 Kustom
    Build 12 DM-1S
    Build 11 MKA-2 -
    Build 10 Basic strat
    Build 9 JM Kustom
    Build 8 FV-1G
    Build 7 ES-2V
    Build 6- Community prototype
    Build 5 LP-1LQ
    Build 4 ES-5V
    Build 3 JR-1
    Build 2 GD-1
    Build 1 TLA-1

  10. #10
    Thanks Frankie and Dedman.

Page 1 of 6 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •