Did end up moving the lower control plate closer to the bridge which meant there would be one screw with nothing to screw into. Knew there was a reason I changed the profile under the neck pocket, glued the offcut in so the screw had something to grab onto.
The pre-shaped headstock wasn't working for me so had a bit of a mess around with that as well.
And that's where I'm at, still need to round over the body edges and get it ready for paint.
Grant
looking great Never!
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Mmmm moddy mod mod, love your work NW!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Looking very tidy!
First (proper) build: http://www.buildyourownguitar.com.au...ead.php?t=8546
Second build: http://www.buildyourownguitar.com.au...ad.php?t=10229
Thanks Dedman, FW and Drew
Grant
Fender electric Fat Strat mim. (Bought)
Maton Electric Acoustic EM325C
Pitbull Guitars ST-1 ( finished) http://www.buildyourownguitar.com.au...ead.php?t=5970
Pitbull Guitars SG-2 ( Finished) http://www.buildyourownguitar.com.au...ead.php?t=6124
Pitbull Guitars JM-1 (Finished. 2018 June GOTM))http://www.buildyourownguitar.com.au...ead.php?t=7150
Pitbull Guitars TL-1 (In production) [url]https://www.buildyourownguitar.com.au/forum/showthread.php?t=8676
Hello from Montreal.
I am attempting my first build of the same model except left handed. I was wondering where can I find the proper measurements for this kit so I can be sure that the bridge is lined up properly and at the right distance.
Cheers
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Hi Marc
pablopepper has described the way to check the right distance, called scale length. I'm assuming you are going to use the bridge that came with the kit? If so, then you will need to sit the posts for the bridge in temporarily into the pre-drilled holes (don't knock the steel bushes in yet, unscrew the posts from their bushings, wrap tape around the threads of the posts until you get a firm fit into the holes for them) and place the bridge in position.
For more information, go to PitBull's website, at the top of the page you will see the heading Guides, click on that and go to Instruction Manual. On page 8 is a more detailed description and on the next page a link to a video for this process.
https://www.pitbullguitars.com/wp-content/uploads/pdf/Pit%20Bull%20Guitars%20Manual.pdf
Hope that link works and enjoy building your own guitar.
If you're not sure, feel free to ask as many questions as you need.
Grant