Hi gang, I'm looking to get some DingoTone neck finish for Elmo, but I was interested to know the differences in shades/colours between the three available. Is there a colour comparison chart I've missed?
Hi gang, I'm looking to get some DingoTone neck finish for Elmo, but I was interested to know the differences in shades/colours between the three available. Is there a colour comparison chart I've missed?
"Music is in the air; it's my job to pull it out."- Jaco Pastorius
hey BG, might pay to message DB, I've forgotten. I have a feeling bloodwood isn't red its more a vintage amber I think. Acacia might be more brown. Mission Beach looks almost orange and colourless speaks for itself.
So the neck or fingerboard have no finish on them ? seems strange for a factory build
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I've used the neck clear coat and yes, it was clear! On a maple neck it added a very slight tinge to the natural colour (like wipe-on-poly but not as yellow)
Current Projects
#Planning 5 String Bass
BG before you order the DT neck kit just check with DB, my guesses of the colours could be way off !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Bloodwood sounds ideal. Order shall be placed- thanks, DB!
"Music is in the air; it's my job to pull it out."- Jaco Pastorius
Feast & Watson Golden Teak.
Attachment 31271
cheers, Mark.
Nice looking guitar
Looks pretty close to what i want - what did you finish the fretboard with? (if anything)
There was some concern earlier in the thread that the stain on the fretboard may wear through?
Regards
David