pickguard looks good Ponch, you got me keen now to build a 3 pup tele !
think the duramax paint should be ok to use, make sure you use a compatible clear coat so same brand
pickguard looks good Ponch, you got me keen now to build a 3 pup tele !
think the duramax paint should be ok to use, make sure you use a compatible clear coat so same brand
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Go for gold Woks!
Sent from my iPhone using Tapatalk
Current Projects
#Planning 5 String Bass
haha that's it Ponch, means I'll have to cut another tele on the CNC haha
you just going to use a strat 5 way switch ?
would love to put 3 mini buckers in, what a beast that would be !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah ponch, it was cheap and easy. Haven't shined it yet
Sent from my Pixel using Tapatalk
Last edited by Andy40; 09-09-2017 at 10:15 AM.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Nice one Andy off to the green shed I go!
Sent from my iPhone using Tapatalk
Current Projects
#Planning 5 String Bass
Started on the pup route. Marked location, drilled out as much as possible then followed on by chisel. I’ll next clean up with dremel
The neck should be finished by late this week
Sent from my iPhone using Tapatalk
Current Projects
#Planning 5 String Bass
And cleaned up. The Strat pup fits perfectly in it. The existing neck route needs to be widened a tad. Now to figure out best way to deal with the middle pup wires...
Sent from my iPad using Tapatalk
Current Projects
#Planning 5 String Bass
Nicely matched planks of Alder there Ponch.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Yes almost a shame to paint it... I drilled the middle pup wiring hole, basically straight down the centre line from the neck pocket, through the middle cavity to the bridge cavity. Bridge to control cavity has a nice wide hole and can fit 2x sets of vintage cloth pup wires
Sent from my iPhone using Tapatalk
Current Projects
#Planning 5 String Bass
good work Ponch, on the same day we were both routing the middle pup cavity on a tele ! I did a similar thing drilled 2 long holes to connect the pup cavities
Last edited by wokkaboy; 11-09-2017 at 12:13 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote
