Started the build, French polished the body and neck. Ready to start wiring.
Has anyone built one of these? Pics to come. Will be seeking some advice along the way
Started the build, French polished the body and neck. Ready to start wiring.
Has anyone built one of these? Pics to come. Will be seeking some advice along the way
Welcome to the forum, Bill! I haven't built one, but I'm sure someone else who has will chime in. Looking forward to the pics. How did you find the French polishing?
#001 (LP-1S) [finished - co-runner up Nov 2018 GOTM]
#002 (WL-1)
#003 (MPL Megacaster - semi scratch build) [finished]
#004 (ST-1 JR - Arachnoid Superhero build) [finished]
#005 (LP jr)
#006 (TL-1A)
Junk shop acoustic refurbs (various)
'The TGS Special'
[attach=config]23977[/attach]
Last edited by bill.cox; 06-01-2018 at 05:00 PM.
French polished body and neck
Bridge fitted, ready to start wiring.
Looking nice dude
Build 1: Non-PBG Flamed Maple LP - Wine Red
Build 2: JRM-1DC - The Butterscotch Belle
Pedalboard Build
Nice polishing!
From your other thread post, it looks like you didn't get any pickup mounting screws (or springs?) with your kit (the PBG kit pictures actually shows pickup mounting rings as part of the kit, which is rather odd!). I'd email Adam and he should sort you out with the relevant screws and springs ASAP.
Looks lovely
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Posting Permissions
Reply With Quote