Hey guys,
I got the drummer of our band on the diy guitar bandwagon and he ordered himself a lefty FBM-1.
He's gone 200% upgrade with second hand firerbird tuners, tv jones pickup, etc.
He's planning a solid paint finish and because he's super keen he primed, painted, sanded back to wood, primed again... all this without applying any grain filler.
So the grain is quite visible as you'll see on the 2 close up of the body.
What would you guys recommend? Sand back to wood to apply timbermate and then start again, or keep going with the coats of primer, then sand, then primer, etc. until flat?
I am thinking sanding and doing proper grain filling should be the best option but wanted to get your thoughts before I get him to send again!
Cheers
Sent from my SM-G935F using Tapatalk