5 string Keef special Washie!
5 string Keef special Washie!
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
I was thinking more Ry Cooder actually. That's going to be a Future FrankenWashie job though.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Nice blank canvas but need a router and plenty of balls to take on this sort of project......will have to pass but was seriously tempted but when you add-on cost of hardware & PUP's some of the complete kits look more attractive and require less work too.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
I thought about that Waz, I have a couple of kits worth of stock stuff sitting around due to sourcing other pups and machine heads.
The work required factor is not an issue for me, and I have the tools needed to do the necessary on it. My builds seem to be getting done a wee bit at a time anyway so it's not like time is a factor either.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Looks like I was too late for this one! Was thinking esquire, bridge humbucker coil split, no pickguard, back routed, top loaded bridge all in a seafoam finish
Sent from my Moto G (4) using Tapatalk
Current Projects
#Planning 5 String Bass
I was actually toying with the idea of a Single Coil split HB in the bridge position on this. But hey, I tend to make it all up as I go along, it could be a traditional tele by the end of the morning!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Nice work FrankenWashie.
This was also supposed to be a Thinline style body, that is, semi hollow or chambered.
I did give it the tap test, but can't confirm. Also there's no sign of a "top", so I'm pretty sure it is just a solid body.
I guess you will find out for sure.
Cheers,
Adam
adamboyle(at)pitbullguitars.com