Hey Jon, don't worry, just add to your last post "moderators please feel free to delete my double post"
purple is looking pretty good. Did you grain fill the body before the primer coat ?
Looks like I can see all the grain pores still
Hey Jon, don't worry, just add to your last post "moderators please feel free to delete my double post"
purple is looking pretty good. Did you grain fill the body before the primer coat ?
Looks like I can see all the grain pores still
Last edited by wokkaboy; 17-05-2016 at 12:06 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Or just edit it into a sweet Mr T pic. Everyone will love that!
Looking good man. Nice colour.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
no I didn't bother with grain filling the body because it was very smooth after i'd finished sanding it.
I think where I went wrong was adding that extra layer of chrome base coat (thought it would give it extra shine)
as it gave it a stubble-like effect in some areas. the purple coat was due to go on 30 minutes later so I was worried
if I allowed it to dry so that I could sand it smooth again, the anodizing effect might not work properly
"too many guitars" is not in my vocabulary
as a result it has a bit of texture, which I don't mind.
I make punk music so it doesn't matter that my guitars aren't showroom perfect
"too many guitars" is not in my vocabulary
Jon, give it a good wet sand and apply some more purple coats, should smooth out the surface
be worth masking your pup/control cavities and most importantly the neck pocket would be best paint free if the neck heel in the pocket was a tight fit during the pre build mock build
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Short notice! LOL.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
good advice, thanks for that.
I've masking taped the neck pocket, learnt that was a necessity after the first kit I slapped together.
there is very little purple paint left, perhaps just enough to paint the headstock (haven't decided whether to leave it plain or paint)
may have to buy another can (which i'm reluctant to for $20 a can)
"too many guitars" is not in my vocabulary
ok good I wasn't sure if the neck pocket was masked.
What clear coats are you using ? best use the same brand for compatibility, so stick with Dupli Colour
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in