Hey Matt sounds like a plan. I've never used wipe on poly and only heard negative feedback about it.
Hey Matt sounds like a plan. I've never used wipe on poly and only heard negative feedback about it.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
No problems with wipe on poly here, but i will shoot poly or nitro or whatever next time i am using that sort of finish.
Does anyone have a good p90 wiring diagram for me, preferably as simple as possible to follow
Hey Matt, wiring diagram should be as per standard LP wiring, presuming your P90's just have hot and earth wire and not 4 wires ?
try this
http://www.pitbullguitars.com/wp-con...m4Pot%20v5.pdf
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Awesome that looks fairly easy to follow, ill do what ive seen others do and trace it out onto card matching the locations and distances so that i can wire it up easily.
Need to sand back my latest coat of paint, new pics to come soon...
Hey Matt the wiring diagrams are pretty straight forward. Just orientate the pots the correct way (it's easy to get the 2 outside pot lugs reversed) and alot of people get the hot and earth join on the output jack the wrong way around.
I use a piece of cardboard and mount the pots on that and rest it over the control cavity and try not drop hot solder on the finish !
I also earth the volume pots and put the capacitor on the tone pots first up, can mount them in a vice so you have 2 free hands to solder.
Anyway you are a while of wiring but good to plan ahead
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Just finished sanding back the second coat of Montana Black, all taped up ready for the third and hopefully final.
I want to give the top a solid layer of paint to then clear over and cut back to a sharp finish.
Sanding all the orange peel back made it look really nice but some spots did go back to the white primer. The weird discolouring in the horn is from the stain sinking into the wood filler that must have been used in the factory. Its not too obvious in person so im ok with it.
looking good Matty !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
This just arrived at work, will most more mockup pictures tonight to see how its all coming together.
Think i may ditch the pickguard for a cleaner look with this beast on there.
nice Bigsby Matty, looks like a genuine one !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Reply With Quote
