Brian May - Red Special

[Open_g]

Anybody got the electronics layout and maybe some simplification since the guitar is quite old and hardware technology has evolved?

[Bass Guy]

This might be of assistance.

http://guitarwiring.blogspot.com.au/...ification.html

http://www.premierguitar.com/article...ys-red-special

[Open_g]

Thanks. 2 alternatives with different outcomes. I guess I will work it out from first principles and see if I get the same result and whether both can be incorporated together relatively easily. Brian is a mathematical (and musical) genius so I would probably run with his version once I have the nerve to drill holes in my guitar and add switches.

[stan]

are you making a red special copy or just putting the wiring in a different project?

[Open_g]

I am not making a copy. Considering imitating the wiring on a different project. Once I have it worked out I will probably test wire it outside the guitar body before committing to internal and cosmetic surgery.

[stan]

sounds interesting

[Bass Guy]

Found this too, which is rather tempting

http://www.guitarfetish.com/BHM-Styl...rd_p_1181.html

[Sheven]

Is this a a kit Pitbull could look at doing?
more of signature series "Area"

[nDR01d]

Found this too, which is rather tempting

http://www.guitarfetish.com/BHM-Styl...rd_p_1181.html

I have done this - with varying degrees of success. Sometimes the switches work, sometimes they crackle, sometimes they don't work. I'm not sure if it was my soldering or the kit itself, but I can tell you the instructions on one side are different to other side. And you will need hands steady as a surgeons. It's all really small stuff.

[kimball492]

You Bryan May fans might appreciate this Red Guitar Templates
https://guitarsandwoods.com/red-spec...emplate&page=8