OK.
After extensive R&D and using my product on my own scratch builds, I am pretty sure that I know what my products can be used for.
I have DT wax on the necks of all my Bass Guitars and I can tell you for certain that it works.
OK.
After extensive R&D and using my product on my own scratch builds, I am pretty sure that I know what my products can be used for.
I have DT wax on the necks of all my Bass Guitars and I can tell you for certain that it works.
Ben, Dingobass is the man for stains, etc. I think the wax should be fine - the maple of the necks is a lot harder than the basswood / ash / alder / etc of the bodies, so the wax not adding any extra strength should not be an issue. As for stains / clearcoats, etc - they probably add a little, but best equivalent I can think of is a jaffa - it has a small, thin, hard shell on the outside, but that can be cracked fairly easily (e.g., by dropping as I did).
How many coats of wax should I use on the neck and frets. thanks guys.