I was wondering how i could get this finish
(http://www.buildyourownguitar.com.au...ead.php?t=5581 ) Its the first guitar down with wood and black stuff.
is it possible to get it on a ib 7 string and is it needing veneer, etc???
I was wondering how i could get this finish
(http://www.buildyourownguitar.com.au...ead.php?t=5581 ) Its the first guitar down with wood and black stuff.
is it possible to get it on a ib 7 string and is it needing veneer, etc???
here is his build diary
http://www.buildyourownguitar.com.au...ead.php?t=5654
I think you'd need to veneer or do a special order with Adam for a veneered one.
Except its glossy (and the spalt) its not a lot different from my GD-1 link in my sig.
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Mindis - Spalted Maple on the LP is a veneer. Given the contoured body shape of the IB-7, I think you may struggle to get it with a veneer top, and it would need to be a special order. Send an email to adamboyle at pitbullguitars dot com, and he should be able to find out if it's possible - that said, I wouldn't get your hopes up. Generally veneer will need binding to make sure that you don't knock bits off on the exposed edges.
Last edited by Brendan; 21-05-2016 at 03:27 PM.
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
ok thank you
Reply With Quote
