Results 1 to 6 of 6

Thread: New Member

  1. #1
    Member
    Join Date
    Dec 2014
    Location
    Gladstone, Queensland, Australia
    Posts
    3

    New Member

    Hi All,

    I have just joined, I have a sg kit I am building for my 10 year old son.
    He liked the look and feel of the sg's in the shop but with the mahogony body
    they were a bit heavy and I always preferred a bolt on neck for some reason.
    The added bonus is as he is helping me he gets to learn a bit about how the guitar he plays works.
    The one I have is ALDER and a bit lighter.
    I tried the swirl type finish (you see a lot of youtube videos of the process), my attempts did not go well so have sanded back to wood and am thinking about using DingoTone. Has anyone used the blue or green. I was wondering what the finish is like when complete.

    Regards

    Steve

  2. #2
    Member Scott J.'s Avatar
    Join Date
    Jul 2013
    Location
    Sydney, NSW
    Posts
    390
    Hi Stevo, welcome to "Guitar Builders (not-so-) Anonymous"!

    The SG's always a perennial favourite ... so simple and sexy, she was just born to rock.

    Dingotone Blues & Greens - there's a been couple done in both quite recently ... I can recall a PRS being done in green but on mahogany, not light-coloured alder and also a couple of blues on basswood

    ... but just "off the bat", I'd recommend going into the "My Build Diary" thread and doing a search on "green" and on "blue" - that should be the easiest way to get a good cross-section of what's been turned out ... or wandering through the Photo Gallery (arranged by model) will give a good feel for what can be achieved colour-wise


    Wait a minute ... that sounds like Rock and/or Roll!

    SG-1 ... "Little Miss" finished in Flamenco Cherry Wudtone
    TL-1A ... "Slugger" finished in Antique White Nitro
    EX-1 ... "Metal God" finished in nickel-plate (work in progress)
    ST-1A ... "Scrapper" stained and finished in linseed oil ... and with the "secret weapon"
    GR-1SF ... "Rocker-billy" (just arrived, work in progress)

  3. #3
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Hi Stevo,
    here's pics of I think 4 coats of Dingotone Bondi Blue on a ST-1 basswood body, some of this grain doesn't take the stain as well as others but you get the idea. It's since had another one or 2 coats since the pics were taken. It should get a bit darker after clear coats
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DTBBWK01.jpg 
Views:	265 
Size:	41.9 KB 
ID:	1071   Click image for larger version. 

Name:	DTBBWK02.jpg 
Views:	248 
Size:	36.8 KB 
ID:	1072  
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  4. #4
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Stevo here's some pics of Dingotone Tarkine Green on an ash ST body, and on camphor veneer on the headstock. It's since had a couple more colour coats and has got a bit darker. It will darken more with clear coats.
    Ash is also a tough grain for stain to penetrate.
    Your SG in alder should take both green and blue DT stains quite well I suspect
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DTTGWK01.jpg 
Views:	201 
Size:	50.8 KB 
ID:	1073   Click image for larger version. 

Name:	DTTGWK02.jpg 
Views:	221 
Size:	36.7 KB 
ID:	1074   Click image for larger version. 

Name:	DTTGWK03.jpg 
Views:	174 
Size:	30.2 KB 
ID:	1075  
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #5
    Member
    Join Date
    Dec 2014
    Location
    Gladstone, Queensland, Australia
    Posts
    3
    Thanks guys for the replies and the pictures, I was hoping I would not like one of the colors (that would have made the decision easier) but both look great.

    Steve

  6. #6
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    welcome to the addiction Steve!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •