I've revisited my plans for "Morticia" and decided that plan A is really just too tame for an Addams.
While waiting for bits for my Redback project to turn up, my mind had been festering (dud pun) with ideas for this project.
Not carved in rock yet, but well on the way . . . . (probably to the ugly guitar thread)
Here's a coupla rough new outline diagrams to give some clues . . .
P.S it will still probably have a 'burst.
If your gonna go concept you might as well gomez hard.
This will be quite the thing.
Love your builds Max.
Tony
Ah there's the real Max showing through.
Scott.
Love the headstock and body shapes Max. This design just keeps getting better.
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
looks very cool the sketches Max and I have no doubt you will build it to look very similar. No one will ever know this started off being a SV1 kit !
Can't wait to see it progress
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Mad as Max - mad as!
All you need now is somewhere to put a glowing light bulb.....
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Naah - I think Fester would be more of an ES shape.
This is going to be one wicked looking axe.
Here's a "Thing" hand guitar wall hanger I found for this project on the 'net.
On it's way from USA - AUD$60 all up, but I HAD to have it!
Reply With Quote
