oh ok good stuff Andrew, sure Seymour Duncan will have a standard strat 5 way switch 1 vol, 2 tone diagram.
I'm doing the same with an old build upgrading plus the push pull pots with HSH config.
200 posts till the big 4K, think I will need a new tag, other than 'get a life' hahah
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Saviour of the noobs? Helper of the helpless? All round nice dude? Whatever it is mate your contribution to this community has been massive and personally you've helped me heaps.
no worries Andrew, if I can help others not make some of the mistakes I've made thats a bonus.
As Jman says we are all here to make the forum build better axes ! haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Looking at the switch there are 4 lugs and 4 holes, first time wiring these switches. Does it matter which side is which?
What type of switch is it: CRL, Grigsby, import?
Scott.
It's a crl switch mate.
This is a diagram I did for a CRL 3-way, 0 is the 'common' lug. The only difference for a 5-way is that in position 2 the 1-2 lugs are linked (3-2 on red side) and in position 4 the 2-3 lugs are linked (2-1 on red side). it doesn't matter which side you use, depending on your wiring setup, as long as you match the contact sequence to the switch position you want. Does that help?
Scott.
Yeah mate that's perfect. Cheers.
Mate thats an awsome effect. Good job
Reply With Quote
