Page 2 of 2 FirstFirst 1 2
Results 11 to 14 of 14

Thread: Ageing New Parts?

  1. #11
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    /<\\/p>[]<\\/p>/Quote from wokkaboy on May 14, 2014, 14:34
    HAHA Love that technique DB, have you tried this method ?
    With the hills around your place might come back with 3 saddles on the bridge missing !
    Can I get a 1 hour leave pass from the NR to try this DB?

    Nah, just taking the pee in regards to dragging it around the block

    But I have seen the salty water and vinegar method used, you just need to remove some of the chrome to allow it to work.... A wire wheel on a bench grinder would do it..

    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....

  2. #12
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    DB taking the Pee ? I don't believe that !
    yer I thought dragging hardware on the road was pretty harsh pardon the pun.
    So do I still get the one hour leave pass DB ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #13
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    Yeah, OK Woks. you get to do the Pizza run

    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....

  4. #14
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    oh gee thanks DB, I thought that was AJ's job, I'll be busy changing keg lines as its getting crowded in the NR and alot of thirsty operators
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •