Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 54

Thread: New Ash Bodies due Sept

  1. #1
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    Quote from adam on July 13, 2013, 11:21[/b]
    Alright folks, we've heard the call and we've ordered some new kits in Ash. We'll have ST-1, TL-1 and EX-1 kits in Ash in late August. We'll see how these look before we order other models in ash.
    Adam,
    Any word? Anything on prices as well?

  2. #2
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,151
    /<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/Quote from Brendan on September 11, 2013, 21:54
    Quote from adam on July 13, 2013, 11:21[/b]
    Alright folks, we've heard the call and we've ordered some new kits in Ash. We'll have ST-1, TL-1 and EX-1 kits in Ash in late August. We'll see how these look before we order other models in ash.
    Adam,
    Any word? Anything on prices as well?
    Sorry Brendan, entire shipment of Ash kits were hi-jacked on route by two pirates and a baby Dingo!
    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

  3. #3
    Overlord of Music keloooe's Avatar
    Join Date
    Jan 2013
    Location
    Melbourne
    Posts
    3,162
    So THAT'S what the new Dingo was for!!!

  4. #4
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    haha nice one Gav. Last I spoke to Adam about this they were about a month away so presume with any luck late September or early October, these ash bodies I'm waiting for too, I won't have an entry for GOTM October
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #5
    Hey guys, I'm awaiting advice that this consignment will be shipped this week. Allow 3-4 weeks sailing/customs etc, and I reckon we should have them first week of October (not guaranteed).
    Cheers,

    Adam



    adamboyle(at)pitbullguitars.com

  6. #6
    Mentor robin's Avatar
    Join Date
    Feb 2013
    Location
    Brisbane
    Posts
    1,513
    Ooh, count me in. I can't wait to get my hands on one or three.

    rob

  7. #7
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    yes that it hey Robin, anyone who has built an IB-5 bass will know how good the grain looks on these ash bodies.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  8. #8
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,151
    Woks what are you doing!!!! Everyone will want one and we will miss out if you carry on like that singing the praises of the Ash timber like that!

    It's much heavier than Bass wood, at least by an ounce or two, you have to use Wudtone or Tru Oil or the grain won't show up beneath the car paint....these are all massive, massive, ummm, errrrr, issues you will have to face if you decide to steal the Ash Bodies from Me, DB and Wokka! 8:
    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

  9. #9
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    haha sorry Gav, didn't think of it like that. I better sit in the naughty corner with a bottle of conch girl !
    Hows your IB-5 going Gav ? you started staining/clearing it ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  10. #10
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,151
    /<\\/p>[]<\\/p>/Quote from wokkaboy on September 12, 2013, 15:50
    haha sorry Gav, didn't think of it like that. I better sit in the naughty corner with a bottle of conch girl !
    Hows your IB-5 going Gav ? you started staining/clearing it ?
    Yeah! One coat of Dark Tease and I don't think it needs anymore. Just gorgeous....this line is secure isn't it.......
    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

Page 1 of 6 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •