Please help with wiring

[Keith O]

Morning guys, Please see photo, any advice on where the 2 black and one white wires go would be greatly appreciated, i can find nothing that looks remotely similar anywhere. It's a AST-1SB Thinline. Cheers

[McCreed]

The black wire from the back of the volume pot is the bridge ground. The other black wire soldered to the outer lug of the volume pot goes to the sleeve (ground) lug of the output jack. The white wire soldered to the middle lug of the volume pot goes to the tip (positive) lug of the output jack.

FWIW, you should just added the photo to this post rather creating a new separate post. It just get confusing for you and those of us trying to help if there are multiple posts for a single question.

[Keith O]

Thanks McCreed, for both bits of advice