Went to install the tuners and the nuts need to be trimmed down about 1/8".
That's what lathes are for......
Carry on.......
Sent from my SM-G970U using Tapatalk
Went to install the tuners and the nuts need to be trimmed down about 1/8".
That's what lathes are for......
Carry on.......
Sent from my SM-G970U using Tapatalk
Don’t forget that although the nut will fit once trimmed, the post will be sticking out of the headstock by quite a long way. I’d check the string break angle is going to be OK.