Thanks again McCreed
Moved forward again on this today as the extra copper tape finally arrived.
Shielding added - there is copper tape running between cavities: Neck >> Control and Bridge >> control.
I have layed out the wiring as below and would like to check please:
Q1. How do I get the bridge PUP wire to connect to both the braided to back of volume pot and the center to the 3 way switch lug - can it be added to the switch housing lug that is also earthed to the back of volue pot?
Q2. Have I allocated the braided jack earth wire to the correct jack lug?
Q3. When running the earth wire back to the bridge plate should it the exposed wire touch the copper foil?
Thanks in advance!
D