Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Pit Bull Guitars ES-1S, Bega NSW

  1. #1

    Smile Pit Bull Guitars ES-1S, Bega NSW

    Hi
    Am building a Pit Bull Guitars ES-1S Electric Guitar Kit (Spalted Maple).
    This is my first kit guitar.
    I have previously build a body for a bass, using an existing electric bass for parts. I've also customised electric guitar body shapes, changed pickups & wiring configurations, and done custom paint jobs on acoustic guitars.
    The kit arrived monday. Might have it finished today (Wednesday)
    Click image for larger version. 

Name:	pitbull_ES_1S_kit.jpg 
Views:	15 
Size:	220.9 KB 
ID:	41867

  2. #2
    Here's the bass I built in 2008, from Sassafras I salvaged from a logging coupe.
    Click image for larger version. 

Name:	bass story1.jpg 
Views:	23 
Size:	402.6 KB 
ID:	41868

  3. #3
    Mentor dozymuppet's Avatar
    Join Date
    Jun 2020
    Location
    Perth, WA
    Posts
    616
    The top on that kit looks amazing!

    Sent from my Pixel 4 using Tapatalk

  4. #4

  5. #5
    Absolutely the spalted maple top is a stunning piece of timber veneer. I was planning a blue-burst fade, until I saw how awesome it looked.
    I've used "Cabothane Clear" gloss on the top, and tung oil inside the cavities + the back of the neck & fretboard.
    Click image for larger version. 

Name:	deck.jpg 
Views:	18 
Size:	310.9 KB 
ID:	41884

  6. #6
    Member
    Join Date
    Jul 2019
    Location
    Sunshine coast
    Posts
    197
    Welcome Tony,
    That is a stunning top you've got on that ES! I'm sure it'll turn out great.
    Cool story on the Sassafras bass, dig the headless look too.

    How did you like using the Caborthane clear? That is a poly-urethane clear spray from bunnings right?

  7. #7
    Unfortunately there's no Bunnings here, so it's brush painted. Wet sanding with 240 between the first 3 coats, then 400 for the next 3 coats.
    Now I'm hatching a plan to get that output jack in place; there's only the f-hole to reach into the cavity and install the electrics from the inside, upwards. Bit of wire fed from the top, attach to component, then pull!

  8. #8
    Member
    Join Date
    Feb 2020
    Location
    Indianapolis, IN USA
    Posts
    21
    One popular way to go with the electrics install is to cut a piece of cardboard and make holes where the controls go.
    FLIP the cardboard over and load in all the bits. Wire them up as a set.
    Then, feed string or aquarium tubing into the holes in the body, fasten them to the controls (watching which string goes to which control.
    Then, pull the strings to get the controls to the holes.
    (It's reported to work. - haven't gotten that far yet.)

  9. #9
    Member andybanks's Avatar
    Join Date
    Aug 2021
    Location
    Just Outside Sydney
    Posts
    66
    That's the way I did it, I used an old pizza box lid... It'll give you an excuse to have pizza for dinner one night. :-)

  10. #10
    Member Trevor Davies's Avatar
    Join Date
    May 2020
    Location
    Perth
    Posts
    443
    Welcome Tony.

    That spalted maple top is amazing! Good luck with the build.
    Build #1 - FVB-4
    #2 - LP-1SS
    #3 - FBM-1
    Semi-scratch Explorer - Rebuild Diary
    #4 - AG-2 - Runner up GOTM May 2021
    #5 - TB-4
    Scratch Build #2 - Axe Bass
    #6 - TLA-1 - Current

  11. Liked by: dmoose5835

Page 1 of 2 1 2 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •