Wiring AES-1

[guigue]

Hi there,

I bought an AES-1 kit and I'm about to start the wiring.

Sadly, I can't find any wiring diagram for this specific one.
I took a look to the ES-X diagrams but the wiring looks different from what I received already soldered. And I'm thinking of unsoldering everything to solder it following a ES-1 diagram. Would it be smart ? I don't really know.

I don't find much help on this kit, does anyone tried it and would like to share any tricks ?

See here the actual status :
https://photos.app.goo.gl/gJBYitmzHsyEbLze9
https://photos.app.goo.gl/dQ7YXuERy89Ew4i26
https://photos.app.goo.gl/Niwzp5K7T4eWvKFi6
https://photos.app.goo.gl/BUUQgUpu9aWrdiRDA

Thanks a lot,

Gui.

[fender3x]

It looks like an ES-335 wiring harness would work fine.

https://sixstringsupplies.co.uk/page...wiring-diagram

You would have to make the leads to the switch longer since it's located in a different spot, but other than that, the should be pretty similar.

Looks nice, BTW ;-)

[guigue]

Thanks a lot fender3x, i'll try to stick to this diagram.
g