AG-1 perhaps i am Tony Iommi?

[OliSam]

Working on a headstock shape




Sent from my iPhone using Tapatalk

[OliSam]

The figuring on the front of the headstock is quite nice and im in two minds about covering it up with a black veneer.
May just make it a very dark walnut colour with the stain so that it still shows through??


Sent from my iPhone using Tapatalk

[OliSam]

I have also been thinking of plugging the holes and making a kind-of PRS headstock.
Here is a shot of one that ive been mucking about with lately. It has a wenge veneer.





Sent from my iPhone using Tapatalk

[Simon Barden]

What would Tommy Iommi do?

[Simon Barden]

Dark Walnut Sabbath?

[OliSam]

In a very gentle birmingham accent he would say “ i dont care what the bl00dy thing looks like. Just make it roar!”


Sent from my iPhone using Tapatalk

[OliSam]

Ive been looking at the SD website at wiring options for this fancy bit of pickuplove.
And today i got two push pull pots!




Sent from my iPhone using Tapatalk

[Simon Barden]

That’s just about all the options covered!

Have you checked that the switched pots fit in the cavity? The SG is a lot thinner than most guitars so there’s not as much depth. It could be quite tight, so you may not be able to solder wires to the ‘top’ of the switches but will have to use the sides.

[OliSam]

looks like the push pull pots are going to fit.
I also measured them with a multimeter. both came in at 520. interesting, eh? as theyre marked as 500K pots.

[OliSam]

My thoughts on the lines on the bevels are getting deeper as i surf the ‘net for pics and this is the current view……..




Sent from my iPhone using Tapatalk