Results 1 to 7 of 7

Thread: Bridge and TailPiece Posts - Different Sizes!

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Apr 2021
    Location
    Calgary Alberta Canada
    Posts
    6

    Bridge and TailPiece Posts - Different Sizes!

    Getting ready to put in the posts for the bridge and tailpiece on my double neck SG style, and I see that there are different posts, 2 of each. The tailpiece post, the screw is thicker on on two of them, and the bridge posts...two have the notched dial on the screw and two do not.

    How are they supposed to be configured? Do same go with same? Do specific ones go with the 12 string side and another the 6? Do you use one of each on each neck? I have seen pics where the notched dial post on the bridge goes on the low e string side, and the the non-notched dial post on the high e side. If that is the case, then does the thinner screw post on the tailpiece go on the notched dial side?

    I am sure there is a logical answer....out there somewhere.

    Thanks for your help!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_4780.jpg 
Views:	21 
Size:	58.1 KB 
ID:	40423   Click image for larger version. 

Name:	IMG_4779.jpg 
Views:	20 
Size:	62.5 KB 
ID:	40424  
    Last edited by SeanP31; 04-05-2021 at 12:08 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •