Getting ready to put in the posts for the bridge and tailpiece on my double neck SG style, and I see that there are different posts, 2 of each. The tailpiece post, the screw is thicker on on two of them, and the bridge posts...two have the notched dial on the screw and two do not.
How are they supposed to be configured? Do same go with same? Do specific ones go with the 12 string side and another the 6? Do you use one of each on each neck? I have seen pics where the notched dial post on the bridge goes on the low e string side, and the the non-notched dial post on the high e side. If that is the case, then does the thinner screw post on the tailpiece go on the notched dial side?
I am sure there is a logical answer....out there somewhere.