Good Evening,
I was wondering if any one had experience with wiring. I have a prewired h s s pick guard and I have 4 wires to connect. I have two loose ground wires from my volume pot. I have one loose yellow wire from the middle post on my volume pot, which i believe goes to the hot part of my input jack, and I have 1 loose green wire from my the end of my Tone pot. Not sure where that green wire connects to.
Any help would be appreciated
The green wire might be the bridge ground - that goes to the bridge post to ground the strings.
*Pictures may be rotated due to my proximity to the equator.
Pic would be good. One ground wire to the bridge and one to the the jack. You are probably right about the yellow to the hot tab on the jack. The wire from the tone pot could also be a ground, particularly if the cap is already wired in.
Sent from my ONEPLUS A3000 using Tapatalk
Posting Permissions
Reply With Quote