Hi there, I'm Florian from Germany. I almost finished my mosrite mkll diy kit. Everything works and plays fine except the middle position- sound s like out of phase. First I changed the bridge pickup for an old Peavey strat Pup with more kohm... Sound much more better. BUT the middle position sound still like out of phase. An I do the soldering exactly like in the mkll wiring diagram from pitbull guitars.
Any ideas anyone?
Thanks and greetings from Berlin
Florian lippie
Ok. Im interested also. Watching.....
Sent from my iPhone using Tapatalk
Tele Deluxe: http://www.buildyourownguitar.com.au...ht=tele+deluxe
Johnny Ramone:https://www.buildyourownguitar.com.a...=johnny+ramone
ES2V:https://www.buildyourownguitar.com.a...?t=7455&page=9
DMS-1 Mustang: https://www.buildyourownguitar.com.a...=10548&page=12
AG-1 Perhaps i am Tony Iommi: https://www.buildyourownguitar.com.a...t=11537&page=7
Can you send a pic of the wiring?
Just reverse the wires on the Peavey pickup. ie: solder the current ground/negative wire from the pickup to the switch and the current hot/positive wire to the back of the volume pot.
In this case (two pickup) you can do this to either the neck or bridge pickup, but since the bridge pickup is the non-original component, I would do that.
Making the world a better place; one guitar at a time...
Posting Permissions
Reply With Quote