Slow and steady progress..round overs and neck screw ferrule positions.
String thru musings and DC scratch plate rough fernangling
What method did you use for the string-through? Or do you have a drill press? I don't remember...
Looks pretty tidy!
Making the world a better place; one guitar at a time...
Cher bro! I do have a DP but I still employ the half each side method. Position the bridge, either screw in or double sided tape down. Do the outer 2 holes right through with Brad point tip. Then the other 4 holes half way. Flip 'er over and align the bridge with the outer 2 holes and double sided tape down. Before I drill the other halves of the 4 holes on the rear, i use the Brad point as a punch for insurance that it will take straight and minimise wander.
Yep, nice and tidy.
Also liking the cheeky shot in the background with the mounting rings in place.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
Taking a leaf from the @Simon Barden playbook. Errrrr....I mean spraybook
Neck is coming up a treat with the homemade truoil.
Last edited by Bakersdozen; 22-05-2021 at 08:06 AM.
Ooh, lovely. Touch drying times are comparable?
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
At this stage they are, yes mate.