Very cool dozy. What's it weigh in at?
Did you make the neck also? I can't remember... too lazy to go back...
Very cool dozy. What's it weigh in at?
Did you make the neck also? I can't remember... too lazy to go back...
Making the world a better place; one guitar at a time...
I'm drooling over the boss level bevel
Current weight (minus a few strings) is ~2.6kg.
And no, I didn't make the neck. I reckon I'm 2 or 3 projects away from attempting that.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
It really comes together well when assembled.
Looking at the top E string break angle, you'll almost certainly probably need some string trees, especially as the nut needs to come down which will reduce it a bit further. No point trying to set it up without them.
Thanks Simon
Yep, I've pulled the strong trees out of the box
Last edited by dozymuppet; 07-11-2021 at 06:17 PM.
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
Very cool. Love the wood grain...and...are those Gretch knobs?
Nah, just plain flat tops from Real Parts.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Calling this done. First semi-scratch build. She-oak top, paulownia bottom. Custom headstock shape and profiling on a Pitbull neck. Grover Rotomatic tuners, Tonerider AC4 bridge pickup, Artist Bullbucker neck pickup. Can't remember where the bridge came from.
I may go back and rewire the neck pickup, but not much of a concern at the moment.
More likely is that I'll replace the neck with a smaller headstock, because it feels a bit out of proportion. E.g. MM-style, 4+2.
Other than that, very happy with it. Set up was tricky as first, but turned out fine, and it plays like a beast. Looking forward to it settling in.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
I’m sure you could simply reshape the existing headstock to a 4+2.