It's growing on me
I like the flow of the wood grain pattern better in the first and third picture!
PitBull Builds: FVB-4, LP-1SS, FBM-1, AG-2, TB-4, SSCM-1, TLA-1, TL-1TB, STA-1HT, DSCM-1 Truckster, ST-1, STA-1, MBM-1.
Scratch Builds: Pine Explorer, Axe Bass, Mr Scary, Scratchy Tele's.
The little voices in my head keep telling me "build more guitars"
I'm leaning towards the first one myself. Much debate in my household though
Here's the Paulownia backside:
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
They all look kinda groovy, but I seemed to gravitate towards the last two. It's an interesting project
I don't think you could miss with any of those. They all look stunning compared to my pine efforts.
rob
2 and 4, with the grain pattern spreading forwards, look wrong to me. Out of 1 and 3, I prefer 3, probably because it's lighter in colour. If you aren't going with a natural finish, then you've got more staining options with the paler wood.
I like 2 and 4, because they're unusual, and the cross grain pattern goes out toward the points.
Having said that, I still prefer 1 and 3. I think you need to sand 1, to see the difference between it and 3, and to get rid of the distracting chalk, etc. I'd hazard a guess, and say 1 is a good indication of how the finish will end up - I love silky oak (typically found in Northern NSW, and Queensland. I have a dining setting made from it, and the pattern is kind of similar, but with much smaller markings, so maybe this is indeed She-Oak (which I've never seen in slab form).
Here's a chair, which has varieties of different cuts giving different aspects to the figure.
It's not perfect, but... I drew a line around all sides, and worked on each corner, keeping the saw line straight on each side of the corner, and working around a bit at a time until the corners met in the sides. The blade wandered/drifted occasionally, but overall I was able to keep the line, and meet in the middle in a way that I think is "good enough".
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent