LOL! Funny, but I hope that association doesn't stick!I "had" to buy a new McCreed file, something crankier...
LOL! Funny, but I hope that association doesn't stick!I "had" to buy a new McCreed file, something crankier...
Making the world a better place; one guitar at a time...
Oh, I think it already has ;-)
And now ready for re-finishing. Three comfort contours, and sanded down to 240 grit. Interim weight saving: 500g.
Currently thinking about tackling a grey burst.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
Nice!
Half a kg will be very noticeable when it's hanging on your shoulder. Apart from the weight relief, I think you'll find it really comfortable to play. Especially if you A/B against a standard square edge tele body.
Look forward to seeing the colour go on next!
Last edited by McCreed; 17-01-2021 at 05:06 AM.
Making the world a better place; one guitar at a time...
Half a kilo worth?Originally Posted by McCreed
cheers, Mark.
Nice work. I had a quick look at one of those at the shop in St Peters in Sydney a while ago but wasn't looking to buy one. My first thought was nice quality but weighed a ton. I didn't get to plug it in so I was wondering how do they sound and play? And just remember too, you can hire hand tools and equipment from hire shops like Coates, Allcott and Kennards and they don't usually cost a great deal. Can't wait to see your colour choice and finish. Keep it going, you are doing some nice ground work there.
Some extensive modding done so far.
May as well do the neck mod whilst you're at it.
cheers, Mark.
Definitely for a future project. But for this one, I'm pretty happy with the neck as is.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
Some extensive modding done so far.
May as well do the neck mod whilst you're at it.
cheers, Mark.Probably not a bad call anyway. I'd be fairly confident that Artist used a tinted 2-pack poly (-urethane or -ester) and it would be a difficult job to match and repair any finish you took off the heel.Definitely for a future project. But for this one, I'm pretty happy with the neck as is.
Making the world a better place; one guitar at a time...
I have found through the last couple of builds that my range of sanding cauls has rapidly expanded. I’ve a bunch of varying width flat ones as well.I suspect it will still be on the heavy side (down to 2.29kg now), but I'm having fun anyway
Trusty toolset developing nicely.
Sent from my Pixel 4 using Tapatalk
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Posting Permissions
Reply With Quote
