Hi all,
Having ordered my kit last month I was finally allowed to open the box on Christmas Day (I'm a long time Steve Vai fan so thought I'd go for the SV-1):
In between other seasonal duties I've made a start with fret levelling and crowning (out of order really I know but I really wanted to do something!). Now I've moved on to trying to position the neck correctly. The neck is free to move so I've determined the 'correct' position based on a scale length of 648mm. This causes fret 18 to line up with the base of the top cutaway - which seems to be exactly in line with images of the real thing I have found online. In this position however the curve/join to the rear seems to be a long way up the neck:
Is this to be expected? It feels too far to me so I was considering attempting to carve it back a bit (I don't have power tools for this kind of work so it would be a wood chisel and lots of manual sanding).
Secondly, with the bridge in place it catches the edge of the cavity:
Again, I was just going to take a bit of material away and sand a bit of slope in but wanted to check I hadn't missed anything first.
Any assistance greatly appreciated!