You can spray some poly over the decal to bury it.Originally Posted by IngridM
Did some more coats of Tru Oil and I’m now on day 12 of curing time before I polish. On the neck/headstock I ran out of steam and won’t be doing enough coats to bury the decal but I’m fine with that. Last night I added the pots to the pickguard while I was twiddling my thumbs. Counting down to polish and assembly.
I use the exterior marine grade aerosol cabots from the Big Green Shed. They do satin and gloss in the aerosol. I spray 3 coats ten minutes apart...wait two days...wet sand 600 grit...3 more coats....wet sand 800...repeat to 1500 grit if you need.
This is the gloss....
https://www.bunnings.com.au/cabot-s-...-pack_p1520270
Reply With Quote
