Looking for a very clear and very concise wiring diagram for the ib5 bass. Two pickups, two volume and two tone Pots. The pitbull provided wiring diagram in PDF format is incomplete and wrong. It shows one wire coming from the pickup, not 3 (5).
Each pickup has 5 wires . One is black, obviously an earth, so I am happy with that. Each pickup has a pair of wires. Let’s call them red and white and green and white. Red and white are soldered together and green and white are soldered together. One pickup has green and “silver” no insulation and a red and white. The other pickup has red and silver(no insulation) and green and white. One is obviously for volume, and one is for tone.
Could someone please provide clear instructions on which pair is for volume, and which one is for tone?
Following that, provide clear instructions on what pairs get soldered to which posts on the pots?
Thanks in advance. During this process I will document and photograph the procedure and create a post with clear photos for others to follow so they haven’t got to tear their hair out like I currently am. I work on soldering single strand copper wires to legs on USB drive memory chips for data recovery , so I am not afraid of a soldering iron. Aggravates me when I don’t know what wire goes where.
Cheers.
Last edited by Nik; 22-11-2020 at 06:07 PM.
Reason: Help