hi, i'm arie
i'm an engineer from israel, and i'm just buying my first kit (MBM-1, with some mods) and everything that i need to build it right
hi, i'm arie
i'm an engineer from israel, and i'm just buying my first kit (MBM-1, with some mods) and everything that i need to build it right
Hi and welcome.
Start a build diary, post pictures and don’t be afraid to ask any questions you want.
thank you
i'm now anxiously waiting for my kitto arrive, meanwhile i'm preparing materials that i need
fret files?
sanding blocks?
i have several woodworking tools already, but i think i might need a few luthier tools as well
Hi arie and welcome to the forum.
The main thing you will need is free ........ Patience!
As an engineer you probably already have a natural attention to detail.
Generally, you will need a good supply of sandpaper from 80 grit up through the grades to 2500 or so.
Some people go further.
Nut files are good to have but I use the cheap sets of needle files and then a bit of folded sandpaper to polish the slot.
Get some methylated spirits. This is useful for finding glue spots etc.
Sanding blocks are always useful - I tend to use the cork ones.
Many of the tools can be home-made and work out much cheaper (fret leveler, notched straight edge etc).
I would suggest that you get the tools as you need them rather than ordering a whole set of tools that you may not need yet.
What finish are you considering?
Cheers
Ricky
Build #1 non-PBG SG type
Build #2 ES-1GT GOTM September 2020
Build #3 Scratch build ES335
Build #4 Scratch build Les Paul River Guitar
Hi ricky,
i think i'm going to stain the guitar, blue to cyan burst
i'm reading up on it now, and it seems fairly doable
i'm trying to understand the parts after the paint - cutting compund? polish?
clear coats?
Arie
Welcome to the forum!
#001 (LP-1S) [finished - co-runner up Nov 2018 GOTM]
#002 (WL-1)
#003 (MPL Megacaster - semi scratch build) [finished]
#004 (ST-1 JR - Arachnoid Superhero build) [finished]
#005 (LP jr)
#006 (TL-1A)
Junk shop acoustic refurbs (various)
'The TGS Special'
Welcome along Arie - best place to start is the build guide here: https://www.buildyourownguitar.com.a...ead.php?t=9377
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
Welcome Arie
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
thanks everyone