Ah, a travel creature for fitting in an overhead locker on a plane. Why not?Originally Posted by FrankenWashie
Ah, a travel creature for fitting in an overhead locker on a plane. Why not?
The best part is he folds and stores himself.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Sooooo this is a $5.00 chunk of recycled nameless blonde scrap wood that was intended to be the boring inter layer between two layers of Zebrano.
Might have to shelve that plan and think of some other awesomeness to perpetrate with this chunk.
Sent from my iPhone using Tapatalk
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
PHwoar!
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Steady on! There might be children watchingPHwoar!!
It looks interesting at 1st glance, but to me it looks like all the action would be in the centre where the neck and pickups and bridge are going to cover and hide a lot of the figuring. It's all going to be down to relative size and position which is hard to tell without any reference. Maybe cut a body shaped hole out from cardboard, lay it on the wood with some card pickup and bridge bits and see what you think?
i had the same thought, but it’s an exercise for waaaaaaaaayyy down the track. It may yet end up as a small side table for the man cave.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Or maybe even a 4-piece top using only the centre sections?
Or maybe another fold up lab assistant?
Posting Permissions
Reply With Quote
