I think so. So you just need to connect the pickups. You've got a few connections to make on the ground tab on the selector switch, which can be awkward. It can help, if you have a bit of tinned copper wore, to solder the wire to the the ground tab on the switch, and wrap it round the other ground connections and solder that up. Rather like as shown in this video, except you haven't got the same external braid wires, but you can connect up the shield braid in a similar way if you find it easier. Just make sure you cut the pickup cables so have enough insulated length of signal wire to make the connections on the other side of the switch without any risk of the signal shorting to ground.
No, but I’d take a little time to get a coherent plan of how you will arrange the tuners. As shown, the rear pic shows the tuners at several different angles relative to the edge of the headstock, which looks rather messy IMO. Aesthetics aside, the only thing to be aware of if you set the tuner posts at 90° to the headstock edge is that this will bring the pegs closer together, so just make sure that there's sufficient space to turn a tuner without knocking the tuner(s) next to it. It shouldn't be an issue, but worth checking. You may struggle with a string winder unless you turn the pegs either side to face straight up or down, giving maximum space between the buttons, but this is normal practice on 6-in-line headstocks, it’s just the final manual tuner adjustment you need to check for.
Last edited by marcianotmarsha; 02-12-2020 at 04:42 AM.
It looks great. How does it play?
There isn't really a 'right' way to install humbucking pickups, but where you have screws and slugs, the screws are normally aligned to face away from the middle of the body, so the way the bridge pickup is installed is 'correct'. However that's cosmetic only (and started by Gibson just because they thought it looked best). Rotating the pickup 180° doesn't change the sound or the output polarity, though if you are coil splitting, then it will affect whether the selected single coil is nearest to the bridge or not.
Ah! I just saw someone else's pickups installed differently on Instagram. Good to know that these particular ones don't have that going on right now. There's no coil splitting here, but if I change out the humbuckers, I may decide to do some coil splitting as well.
The guitar plays decently. It's not necessarily going to be replacing my regular player, but I'm happy with how it came out, considering it's my first build and the hardware and electronics are almost all from the kit. (I swapped out the plastic nut for a Graphtech one and I popped some decent and sleeker looking black Pot covers on it, considering the Gibson style ones looked bulky and out of place.)
When I took the guitar to my guitar tech to have the nut swapped out, he seemed decently impressed for a first build....so, I'm taking this one as a win. I'm thinking I may want to take on a semi-hollow body next...since that's the only thing that my boyfriend and I don't have in the house at this point
Good work!
Coincidence??? I think not...I realized that I made my guitar kind of look like me.
Making the world a better place; one guitar at a time...